Main paper tray
To load paper in the main paper tray:
1
Lift the output tray and slide the paper width and length adjusters to their outermost
positions.
If printing more than one page on transparencies, photo paper, or other special paper, the
Resume light blinks after each page has been printed to allow for the printed page to dry
before printing the next page. Press the Resume button if you do not want to wait for the
printed page to dry before printing the following page.
The main paper tray is designed to hold the paper type you use most often. It can hold up to
150 sheets of plain paper or 30 transparencies.
ENWW
3-2
2
Insert a stack of paper, up to 19 mm (0.75 in.) or 150 sheets, print-side down along the
right side of the main paper tray, until it stops.
3
Slide the paper width and length adjusters in until they stop at the edges of the paper.
4
In the printer driver, change the print settings to match the paper size, type, source, and
orientation, and then click
OK
. (For instructions on accessing the printer driver, see
“Changing print settings.”
)